How do I Identify a Holley Carb?

Answer

Most Holley carburetors have a list number stamped onto the upper right hand corner of the airhorn. The 4150 HP has it stamped just behind the throttle linkage. You can use this number to verify your part. You can find more information here: http://holley.com/TechService/FAQ.asp

1 Additional Answer

Most Holley carburetors will have its list number stamped into the upper right hand corner of the airhorn or 'choke tower'. This number is used to identify the carburetor. For more information on how to identify a holley carburetor go to www.holley.com

Q&A Related to "How do I Identify a Holley Carb?"

how to identify holley carbs?

1. Clean the side of the carburetor above the airhorn or choke tower using the wire brush and degreaser. 2. Locate the part number listed on the side of the carb. It will start with

http://www.ehow.com/how_5594938_identify-holley-ca...

how to identify a holley economaster carb?

1. Measure the distance between the center of the base plate bolt holes width-wise. The distance should measure exactly 4 1/4 inches. 2. Measure the distance between the center of

http://www.ehow.com/how_8547023_identify-holley-ec...

How do I Identify a Holley Carb?

Most Holley carburetors have a list number stamped onto the upper right hand corner of the airhorn. The 4150 HP has it stamped just behind the throttle linkage. You can use this number

http://answers.ask.com/Vehicles/Other/how_do_i_ide...

how to snorkel holley carb?

1. Select the location where you wish the pipe to exit the engine compartment. Most people have the pipe exit through an unobstructed area of one of the front fenders, near the windshield

http://www.ehow.com/how_8520406_snorkel-holley-car...